查看“Birmingham”的源代码

Chimney flue liner can be used to reline the inside of masonry chimney stacks. Flue liners are available in twin skin form, for use as a multi fuel flue liner, or as a single skin liner for use with gas or oil fired appliances.

Flue liner installation can be executed by the homeowner, and in the UK, at least, there are no regulations regarding who can do the installation, yet there are regulations governing how the liner is installed.

When undertaking a flue liner installation, keep in mind basic security precautions, whether working at height or at ground level. If working near the top of the chimney stack, use roofing ladders, a scaffolding tower, or whatever is appropriate for the problem. Suitable protective clothing is worn by always; cut edges of a multi fuel flue liner are sharp, so wear gloves. Soot is acidic, and can be an irritant for the eyes, skin and lungs, so wear goggles, a face mask, and overalls. Always take notice of the manufacturer's directions with regard to the product being installed. [http://www.landyvent.co.uk/about-us learn about flue liner installation]

The chimney should be swept thoroughly, and you also should ensure that it really is structurally sound. Remove any obstructions, such as baffle plates, and also the chimney pot. Once you have established the right diameter of liner needed, use a cord or rope to pull a sample piece up through the full height of the chimney to make certain easy and free passage. Use one little bit of flue lining only - usually do not use a number of pieces joined together. Give some thought as to whether or not insulation is going to be properly used across the lining.

Ensure that the lining is installed in accordance with any directional marks provided by the manufacturer. Attach a draw rope to the lower end of the lining, and, working as a pair, pass the rope down the chimney. The installer at ground level draws the liner down the chimney while the installer at roof level passes the liner over the top of the chimney and to the flue, taking care in order to avoid bending it, and preventing, as far as possible, any scraping over internal surfaces.