查看“CanterCamden45”的源代码

Hearing products which easily fit into the head. 

You should carefully wipe down with a dry cloth or tissue before you go to sleep when removing your hearing aid. Some time should be also spent by you inspecting the part of the hearing aid that fits to the ear canal as it is probably that a of ear wax might have occurred. If here is the case you then must take away the wax. You should receive a cleaning device which may be used to achieve this which typically takes the shape of a pick or a brush when you ordered the hearing aids or a toothbrush could be also used by you. 

Hearing products which fir behind the ear. 

Much like the above mentioned, the task is comparable. However, the primary huge difference being that the ear form which fits into the ear which is generally made from Lucite or silicon which is non-electrical and therefore can be washed in mild soapy water. Before washing it is very important to ensure the earpiece is disconnected from the behind the head part to ensure the part of the hearing aid does not get wet. Dry the head piece properly before using and also make sure that the tube is free from water. Please note that the tube may need certainly to be replaced after a time period generally 3 to a few months since the mobility may be lost. 

Things not to do 

1. Wash the hearing aid with solvents or alcohol as this can cause the materials that the aid is built to breakdown. You can get special cleaning fluids designed to clear hearing aids. 

2. Dont allow the electric part of the hearing aid get wet. Avoid when bathing of washing wearing the aid. 

3. Try not to decline the hearing aid, especially on a hard floor as the hearing aid may be caused by this to break. [http://twitter.com/tinnitusmn buy audiology]