查看“Drum”的源代码

Hearing aids which easily fit in the hearing. 

You must watchfully wash down with a dry cloth or tissue when removing your hearing aid before you go to sleep. You should also invest some time checking the part of the hearing aid that fits into the ear canal since it is probable that a of ear wax could have occurred. If this is the case then you must eliminate the wax. You should obtain a cleaning device which can be used to achieve this which often takes the shape of a pick or a brush when you purchased the hearing aids or a toothbrush could be also used by you. 

Hearing products which fir behind the ear. 

As with the above mentioned, the task is comparable. But, the key difference being that the ear mold which fits into the ear which is usually made from Lucite or silicone which is non-electrical and therefore may be cleaned in mild soapy water. Before washing it is crucial that you ensure the earpiece is disconnected from the behind the ear section to ensure the part of the hearing aid doesn't get wet. Dry the ear piece effectively before using and also make sure that the tube is away from water. Take note that the tube may have to be changed after having a time period usually 3 to a few months because the flexibility may be lost. 

Things not to do 

1. Clean the hearing aid with solvents or alcohol as this can cause the materials that the aid is built to break down. You can aquire special cleaning fluids made to clear hearing aids. 

2. Dont allow electric part of the hearing aid get wet. Prevent when bathing of washing wearing the aid. 

3. Try not to decline the hearing aid, particularly on a difficult ground as the hearing aid may be caused by this to break. [http://www.prweb.com/releases/hearing-aids/Boynton-Beach-FL/prweb10278871.htm open site in new window]