查看“Duda”的源代码

A squeak in hardwood flooring is brought on by two pieces of wood rubbing against a single one more. One particular way to stop the sound is by decreasing the friction of the moving pieces employing a lubricant. Im not speaking oil right here, but rather a dusting with ultra-fine graphite powder.
 [http://thefloodfighters.com/ analysis]
This is obtainable at your local hardware shops, and for the most component its utilised to no cost lock mechanisms. But if you pour a tiny bit of it on the floor so that it can function its way into the squeaking boards, it could extremely effectively minimize or eradicate the sound.

If that fails, you can constantly try a pair of effectively-placed nails. You first want to pre-drill some slender holes into the wood, angled slightly towards one one more. Then drive the nails in, becoming careful not to bang up the hardwood floor with the head of the hammer.

You can use an 8d or 8-penny finish nail, which has a extremely modest head. Then sink it beneath the surface of the wood employing a nail set. Now you can say very good-bye to that squeak forever. You would require a hammer, a small drill bit, and a cordless drill. This would take no much more than 15-20 minutes to comprehensive.

Now right after you get rid of all the squeaks, use a filler stick in the very same color as the floor to fill any nail hole that are visible. When your floor is actually starting to show its age, youll be capable to renew its surface for about a quarter of what it would cost to set up a new floor.

You can sand and refinish them, usually up to a total of four occasions ahead of so a lot wood is ground away that the nails holding it in place begin to appear. Your hardwood floor really should be as very good as new.