查看“EdinFleshman90”的源代码

Today there are numerous alternatives for putting colorful designs onto porcelain china. Some, like decoupage, waterslide decals and air-dry shows like Delta Air-Dry PermEnamel are within the reach of any home crafter. 

The others, like dye sublimation printing, transfer printing and hand-glazing high-fired pottery require significant investment in equipment and are suitable to well-capitalized businesses and artists cooperatives. 

The 2 classic ways of putting styles onto pottery, hand-painting and transfer printing, still exist today. In addition, there is a model of waterslide decals used commercially which consists of screen-printing decals with glazes and applying the decals to the porcelain. In each case, the pottery is high-fired before decorating to at the least cone 6. [Cone is a measure of heat absorption caused by heat applied over time. Cone 6 translates to between 2165 and 2269 degrees F (according to how quickly the kiln cooks or ramps up ).] Such high-firing provides the tough almost-translucent quality of genuine porcelain. Then the part is decorated and lightly dismissed repeatedly to merge and melt the glazes to the porcelain. 

Incidentally, the word porcelain has been used more and more broadly as new methods developed. Ask any potter to determine porcelain and he'll probably give you the common definition. To a potter, authentic pottery is high-fired (cone 6 or higher) white clay that is at the least notably clear. It has a big percentage of kaolin clay, with the remaining being largely feldspar and silica. This clay composition makes up about the pure white gleam of pottery. 

Artists who paint pottery (instead of make it) refer to three qualities of porcelain: hard-paste, soft-paste, and bone china. Each of them include kaolin but only hard-paste has feldspar and silica and is high-fired. The high temperatures cause the glaze and your body to blend. When hard-paste porcelain is broken, it is difficult to distinguish the human anatomy from the glaze. 

Soft-paste porcelain brings ground glass or frit (material for glass that's perhaps not yet fused and vitrified) and is dismissed to between cone 01 and 1 (1999 to 2109 degrees F). Because soft-paste porcelain is fired at lower temperatures, it does not completely vitrify and remains somewhat porous. When soft-paste porcelain is broken, you are able to recognize a body covered with a layer of glaze. 

Bone china has bone ash added to the kaolin and vitrifies (becomes glass-like) somewhere between cone 2 and cone 5 (2034 to 2205 F). as correct porcelain although much less hard, bone china is more durable than soft-paste porcelain. The bone ash significantly escalates the translucence of the porcelain. 

Finally, search for a tile shop and look at their porcelain tiles. Base clay will be seen by you including white to brown to gray, if they are turned by you over. The definition of pottery in the tile industry has nothing regarding the clay content or amount of firing. Relatively, tile manufacturers define as porcelain any tile dismissed to the level where it absorbs less than a few months humidity. [http://www.acrendo.com/ software medical]