查看“LoweCargile136”的源代码

Hearing products which easily fit into the ear. 

When removing your hearing aid before you retire for the night you should carefully wash down with a dry cloth or tissue. It's also wise to spend time examining the area of the hearing aid that fits in to the ear canal as it is likely that a of ear wax might have occurred. If this is actually the case then you will need to take away the wax. When you bought the hearing aids you must get a cleaning tool which can be utilized to do this which often takes the form of a pick or a brush or you may possibly also use a brush. 

Reading aids which fir behind the ear. 

Just like the aforementioned, the procedure is comparable. However, the primary difference being that the ear mold which fits to the ear which is normally made of Lucite or silicon which is non-electrical and therefore can be cleaned in mild soapy water. Before washing it is vital that you ensure the earpiece is disconnected from the behind the ear section to ensure the electrical part of the hearing aid does not get wet. Dry the head piece correctly before using and also make certain that the pipe is free from water. Take note that the tube may have to be changed following a time period usually 3 to 6 months because the freedom may be lost. 

Things to not do 

1. Wash the hearing aid with solvents or alcohol as the materials may be caused by this where the aid is made to break down. Special cleaning fluids can be purchased by you built to clean hearing aids. 

2. Dont let the part of the hearing aid get wet. Prevent wearing the aid when bathing of swimming. 

3. Try not to drop the hearing aid, especially on a difficult floor as this might cause the hearing aid to break. [http://youtu.be/LBp3o9cT9NE here's the site]