查看“Washing Your Scanner and Your Images”的源代码

The power should be disconnected by you from the scanner when cleaning your scanner. There is high voltage in the lamps and line voltage...Cleaning your reader is very important. The scanner glass only must be clean at the begging of one's scan. Use a glass solution and a soft material. Do not sprayer; fill cleaning stuff directly on the glass? Stay away from the inch leader scales. So you don't risk damaging it.When cleaning the glass don't scratch the scanner glass. Don't uses paper towels on your scanner it's coarse texture that could develop find stretches on the scanner glass. So please make use of a soft towel on the glass. Do not use any rough cleaner on your scanner.Spry the cleaner on the delicate towel not the scanner. Some scanner have a pre-moisten toweletes for cleaning the scanner and the contact. Some company has their particular choice for cleaning the glass. Therefore look at your information to see what things to use.The thing would be to clear the glass and maybe not leave any streaks about it. Among the approaches to see if you have streaks is to raise the lid of the scanner when the scanner light is on and search for the streaks. Reader brilliant lamps cause the runs to show the beef should you not erase it good. An additional way is considering the glass tightly from the medial side underneath the bright lights to see if all of the movie is removing. When you have streaks work with a little bit of vinegar on a moist cloth to obtain the streaks down. Remove the flatbed photo scanner clean between photo to stop oily or talent in your runs from the scum that your photo may have.Some scanner recommend you to use alcohol for cleaning a scanner glass if you're planning to do that use isopropyl in the place of rubbing alcohol. The rubbing alcohol contains oils like lanolin and a film will be left by it on our reader glass. Make sure you wipe the scanner bed and contact great so you do not leave lines or film.Using can air is not always the best action to take I know it is a well known solution to remove dust and dirt from image and scanners.But you should really be aware of the draw backs from using it. The atmosphere that's blowing across a photo or even a scanner generates a fixed charge on the scanner and photo. More dust will be attracted by that and the dust will be scattered by it to your computer and quite where. The can of air is quite costly to purchase and can air can spit propellant onto your picture or negative. Don't blow dust off negative or photograph together with your breath you might hurt it two.When photos are handled by you and negative the edges should be used by you. If you're going to do a lot of scanning with photography or negative. When you're reading it so you don't put oil or dust on your own image. If you desire to keep carefully the oil and dust down when you're handling your photos you can buy some glove. Don't remove your pictures with a moistened toweled or material treated with dusting goods it'll hurt your house photo.When you clear your photo protection or problems make use of a brush to take out the photo. The comb should really be gentle. Before you scan if you scan the photograph greater the specks of dirt will be on the scan this really is extremely important. Before you actual check cleaning a picture and scanner is extremely imported. If the photo or the protection has dust or dirt on it that dirt and dust will soon be on your check photo. You may take away the dirt along with your computer but it takes time to accomplish it. So clean your personal photo scanner and your photo so it will not get so much time.Cover your scanner if you are not applying it this will help to keep it clean and protect the glass top. The glass could be a very costly repair if you have to repair it.