NaylorLeatherwood177：新页面: When you're learning to pass the CCNA exam and earn your accreditation, you are presented to a great many conditions that are either totally new to you or look familiar, but you are not q...

2013-02-15T14:03:18Z

新页面: When you're learning to pass the CCNA exam and earn your accreditation, you are presented to a great many conditions that are either totally new to you or look familiar, but you are not q...

新页面

When you're learning to pass the CCNA exam and earn your accreditation, you are presented to a great many conditions that are either totally new to you or look familiar, but you are not quite sure what they're. The term "collision domain" comes into the latter class for all CCNA candidates.

Precisely what is "colliding" in the initial place, and why do we care? It's the data that's being delivered onto an Ethernet segment that we are concerned with here. Ethernet employs collisions to be avoided by Carrier Sense Multiple Access / Collision Detection ( CSMA/CD ) in the first place. CSMA/CD is a pair of policies dictating when hosts on an segment can and cannot transmit data. Ostensibly, if another host happens to be transmitting a host that desires to transfer information will "listen" to the ethernet segment to see. If no-one else is shifting, the host should go forward having its own transmission.

This is a good way of avoiding an accident, nonetheless it is not foolproof. Their transmissions will collide on the Ethernet segment, if two hosts follow this process at exactly the same time and equally transmissions will become useless. The hosts that sent these two signals will likely then send a signal out onto the section, suggesting to any or all other hosts that they should not send data. A random timer will be started by the two hosts each, and at the end of that time the listening process will be begun by each host again.

Now that we know what a is, and what CSMA/CD is, we need to be able to define a collision domain. A collision domain is any place where a collision can theoretically occur, therefore only one device can send at a time in a collision domain.

In another free CCNA certification tutorial, we saw that broadcast domains were defined by routers (default) and turns if VLANs have now been defined. Locations and repeaters did nothing to define broadcast domains. Well, they don't do anything here, either. Repeaters and sites don't define collision domains.

Turns do, but. A Cisco switchport is actually its own unshared accident area! For that reason, if we've 20 host devices connected to individual switchports, we've 20 collision domains. All 20 devices can transfer simultaneously without risk of collisions. Compare this to hubs and repeaters - you still have one significant collision domain, if you have five devices linked to an individual centre, and only one system at the same time may transmit.

Mastering the creation and definition of collision domains and broadcast domains can be an significant step toward becoming an effective system administrator and making your CCNA. Most readily useful of luck to you in both these worthwhile passions! [http://www.entrust.net/ssl-certificates/extended-validation.htm ssl service]

NaylorLeatherwood177 - 版本历史

NaylorLeatherwood177：新页面: When you're learning to pass the CCNA exam and earn your accreditation, you are presented to a great many conditions that are either totally new to you or look familiar, but you are not q...