The IP56 Housing Standing For Outside Gear

Ip Address 56 is just a score for enclosures which are at the mercy of a number of climate. This is a standard produced by the International Electrotechnical Commission (IEC) and is a global standard. In the U outdoor neumünster.S., the National Electrical Manufacturers ASsociation (NEMA) sets related standards.IEC Ingress Protection StandardsThe IEC has a published standard 60529, which defines Ingress Protection utilizing a two digit code. That standard has all the information about testing and applications.The first digit indicates the protection against usage of hazardous pieces and whether solid objects could possibly get to the encolosure. In other words, how hard is it to stick your finger in there and cause some trouble.The second digit indicates the amount of protection against water.Here are the designations for the first digit - Hazardous Parts:0 - Non-protected1 - Protected against access with the back of the hand (50mm size target )2 - Protected against access with jointed finger (12 mm x 80 mm )3 - Protected against acess with an instrument (2.5 mm )4, 5, 6 - Protected against access with a line (1.0 mm )Here are the designations for the first digit - Solid Foreign Objects:0 - Non-protected1 - Objects greater than 50mm2 - Objects greater than 12.5 mm3 - Objects greater than 2.54 - Objects greater than or corresponding to 1mm5 - Dust protected6 - Dust tightProtection situation for the second digit - Ingress of Liquids0 - Non-protected1 - Water dripping vertically2 - Water dripping, enclosure tilted around 15d3 - Spraying water, upt to 60d angle from vertical4 - Splashing water, any direction5 - Jetting water, any direction6 - Powerful jetting water, any direction7 - Temporary immersion in water8 - Continuous immersion in waterYou can see an IP56 ranked enclosure is protected against dirt (and other tiny particles) and is water tight against jetting water from any direction.