Popular Issues by working with cardsharing for a Technomate

Freezing or Glitchy pic. This could be brought about when working the Sky card in NewCS whenever Global Access EMM's are usually not blocked. Ensure you set up the blockGA parameter to YES. A sluggish ECM time in way over 0.400 seconds may also give rise to this condition although we have no real evidence what really results in a slower response time when using your local card. Opinions with this please ?

Entitlements Not Updating. Stated above, if you are using cc Cam it is best to include some form of client connected by using MGCamd and the AU parameter = 1 in the mf.cfg config file. This will let MGCamd to up-date the entitlements.

Entitlements in CCCam not really displaying at all. Your card was not up-to-date together with the entitlements time has expired. If you're able to, put it back inside the 1st Sky reciever as well as set it on channel 106 ( sky1 ). Let it stay on until it comes alive, might take upto 2 days !!! If you can not have the original receiver set up an MGCamd client and then try it by doing this. At present this method is not really verified running.

CC Cam illustrates an unacceptable or no CAID. This may be most likely the boxkey is screwy. Be sure to now have produced the appropriate boxkey making use of the serial number of the original Sky box.

Config File Locations

Shown down below will be files you may need to run per each setup. Pay attention to a number of variations involving E1 and E2 receviers. You can find more helpfiil information on price from Share Satellite.

CCcam 2.1.3 - Do the installation by way of blue panel - Host & Client
CCcam.cfg - /etc ( E2 boxes )
CCcam.cfg - /var/etc ( E1 boxes )

NewCS 1.67RC1 & MGCamd 1.31 - Host & Client
newcs.xml - /var/tuxbox/config( All boxes )
mg.cfg - /var/keys ( All boxes )
newcamd.list - /var/keys ( All boxes )

NewCS 1.67 & CCcam 2.x.x
I highly recommend NOT using this configuartion at the moment because you will have trouble with the card entitlements running out you could have to reinstate the card some other way.

Installing NewCS manually ( pcsc or usb supported binary )
newcs.mips.pcsc - /usr/bin ( E2 boxes )
newcs.ppc.pcsc /var/bin ( E1 receiversboxes ) I believe?