The IP56 Enclosure Rating For Outside Gear

Internet Protocol Address 5-6 is just a score for enclosures that are subject to a number of climate. This can be a standard developed by the International Electrotechnical Commission (IEC) and is a worldwide standard. In the U.S., the National Electrical Manufacturers ASsociation (NEMA) sets related standards.IEC Ingress Protection StandardsThe IEC features a printed standard 60529, which identifies Ingress Protection utilizing a two digit code. This standard has all the details about screening and applications.The first digit indicates the protection against usage of hazardous pieces and whether solid objects might get to the encolosure. In other words, how difficult is it to stick your finger within and cause some trouble outdoor shop kiel.The second digit shows the amount of protection against water.Here are the designations for the first digit - Hazardous Parts:0 - Non-protected1 - Protected against access with the rear of-the hand (50mm size subject )2 - Protected against access with jointed finger (12 mm x 80 mm )3 - Protected against acess with an instrument (2.5 mm )4, 5, 6 - Protected against access with a line (1.0 mm )Here are the designations for the first digit - Solid Foreign Objects:0 - Non-protected1 - Objects greater than 50mm2 - Objects greater than 12.5 mm3 - Objects greater than 2.54 - Objects greater than o-r corresponding to 1mm5 - Dust protected6 - Dust tightProtection name for the second digit - Ingress of Liquids0 - Non-protected1 - Water dripping vertically2 - Water dripping, enclosure fished up-to 15d3 - Spraying water, upt to 60d direction from vertical4 - Splashing water, any direction5 - Jetting water, any direction6 - Powerful jetting water, any direction7 - Temporary immersion in water8 - Continuous immersion in waterYou can easily see that an IP56 rated enclosure is protected against dust (and other little particles) and is water tight against jetting water from any direction.