The IP56 Enclosure Standing For Outdoor Gear

Ip Address 56 is just a standing for enclosures that are subject to many different weather conditions. It is a standard produced by the International Electrotechnical Commission (IEC) and is really a worldwide standard jack wolfskin kiel. In the U.S., the National Electrical Manufacturers ASsociation (NEMA) sets similar standards.IEC Ingress Protection StandardsThe IEC includes a published standard 60529, which specifies Ingress Protection employing a two digit code. That standard has all the information regarding assessment and applications.The first digit indicates the protection against usage of hazardous portions and whether solid materials could get in to the encolosure. In other words, how hard is it to stay your finger inside and cause some trouble.The second digit indicates the amount of protection against water.Here are the designations for the first digit - Hazardous Parts:0 - Non-protected1 - Protected against access with the rear of the hand (50mm size object )2 - Protected against access with jointed finger (12 mm x 80 mm )3 - Protected against acess with something (2.5 mm )4, 5, 6 - Protected against access with a cord (1.0 mm )Here are the designations for the first digit - Solid Foreign Objects:0 - Non-protected1 - Objects greater than 50mm2 - Objects greater than 12.5 mm3 - Objects greater than 2.54 - Objects greater than or equal to 1mm5 - Dust protected6 - Dust tightProtection designation for the second digit - Ingress of Liquids0 - Non-protected1 - Water dripping vertically2 - Water dripping, enclosure moved as much as 15d3 - Spraying water, upt to 60d angle from vertical4 - Splashing water, any direction5 - Jetting water, any direction6 - Powerful jetting water, any direction7 - Temporary immersion in water8 - Continuous immersion in waterYou can easily see that the IP56 ranked enclosure is protected against dirt (and other tiny particles) and is water tight against jetting water from any direction.