The IP56 Enclosure Status For Outside Equipment

Internet Protocol Address 56 is a status for enclosures which are at the mercy of many different weather conditions. It is a standard produced by the International Electrotechnical Commission (IEC) and is just a global standard. In the U.S., the National Electrical Manufacturers ASsociation (NEMA) sets related standards.IEC Ingress Protection StandardsThe IEC includes a published standard 60529, which specifies Ingress Protection utilizing a two digit code. This standard has all the information about testing and applications.The first digit indicates the defense against use of risky parts and whether solid materials might get in to the encolosure jack wolfskin neumuenster. In other words, how hard is it to stay your finger in there and cause some trouble.The second digit indicates the amount of protection against water.Here are the designations for the first digit - Hazardous Parts:0 - Non-protected1 - Protected against access with the rear of the hand (50mm size thing )2 - Protected against access with jointed finger (12 mm x 80 mm )3 - Protected against acess with a tool (2.5 mm )4, 5, 6 - Protected against access with a cord (1.0 mm )Here are the designations for the first digit - Solid Foreign Objects:0 - Non-protected1 - Objects greater than 50mm2 - Objects greater than 12.5 mm3 - Objects greater than 2.54 - Objects greater than o-r corresponding to 1mm5 - Dust protected6 - Dust tightProtection name for the second digit - Ingress of Liquids0 - Non-protected1 - Water dripping vertically2 - Water dripping, enclosure fished around 15d3 - Spraying water, upt to 60d angle from vertical4 - Splashing water, any direction5 - Jetting water, any direction6 - Powerful jetting water, any direction7 - Temporary immersion in water8 - Continuous immersion in waterYou can easily see that an IP56 rated enclosure is protected against dust (and other little particles) and is water tight against jetting water from any direction.